5 Common Problems With Nest Thermostat

One of the most popular smart thermostats on the market today is the Nest thermostat. It learns your preferred temperature preferences through automatic energy-efficient programming to create a tailored energy-saving plan for your home.

The Nest Learning Thermostat and Nest E can detect when you’re at home or away using motion sensing and adjusts the energy-efficient schedule to save more money and qualify you for valuable rebates from your energy supplier.

The Nest thermostat is compatible with a wide range of 24-volt heating and cooling systems, but even if your system is compatible, you can find Nest thermostat problems arise.

Common Problems With Nest Thermostat

You can see the C-wire, or common wire, if wiring it yourself. Yet you are better at letting experts do this and avoid improper wiring problems you cause by misunderstanding the interactive wiring guide.

In our guide, you can start troubleshooting nest thermostat issues. By the end, you’ll see what Nest thermostat issues you may have and then solve these to have the best indoor air quality at home.

Why Did My Nest Stop Cooling?

The Google Nest Thermostat is an improvement over older programmable thermostats powered by a combination of wiring and AA batteries.

It features a lithium-ion rechargeable battery and wiring that allows it to connect to Wi-Fi, power its digital display, and turn on your heating and cooling system. (Read Can You Leave A Space Heater On All Night)

Here are some of their most common nest thermostat problems if the Nest can’t draw ample juice:

  • Poor battery life.
  • Thermostat motion-sensing is not working .
  • The thermostat occasionally disconnects from your Wi-Fi.
  • Your system suddenly turns on or off or won’t shut down.
  • Your system is making strange noises.
  • Heating or cooling is short cycling or repeatedly turns on and off after short periods.
  • A delay notification is falsely displayed on the Nest thermostat’s screen, like “heating is delayed for #:## minutes.”
  • The system fan runs continuously or won’t turn on or turns on and off repeatedly.

All the above can make you think you have an issue with your heating and cooling system. However, if you have recently installed the Nest, it is advisable to start the thermostat initially.

It is more important to do this, especially if you face moderate weather and haven’t been using your air conditioning much.

Troubleshooting Nest Thermostat

Troubleshooting Basics for Nest E Heating and Cooling

Your air conditioning may occasionally have an operating issue that prompts a help message on the Nest App on your phone or the thermostat’s display.

For each of these codes, Google provides in-depth troubleshooting advice. For example, they could suggest anything from a broken cable to a configuration issue, a problem with your Wi-Fi or internet connection, and more.

It’s vital to trace the issue before disassembling anything if you notice a troubleshooting code. This will almost certainly save you a lot of time.

You should also check for a few other issues:

  • Check an emergency cutoff isn’t activated, and you’re losing power on your HVAC.
  • These resemble a light switch with a special color wall plate and label.
  • Check there are no blown fuses for your electrical devices.
  • Make sure your internet service provider’s Wi-Fi signal is strong.
  • Make sure your Wi-Fi is operating correctly.

Now you can move on and fix problems with Nest thermostats.

Nest Thermostat Not Cooling

This problem most typically happens when your system is improperly wired. For example, there are two types of wiring configurations on your thermostat: heat pump row and conventional.

You must ensure that the wire labels from your thermostat are inserted correctly into the Nest thermostat.

Before changing anything, you should always take a photo of your wiring arrangements in your heating and cooling system.

Always remember to turn off the electricity before exposing your thermostat’s wires and carrying out any Nest thermostat troubleshooting on your air conditioning or heating and cooling system internals.

Can Nest Thermostat Fail?

You can find many issues fall on Nest systems and your HVAC system. While many are not severe, they can stop your system from running as it should. (Learn How To Heat A Hot Tub Without A Heater)

Nest Thermostat Off But Heating Is On

If there’s no error code and the Nest thermostat shows it’s off, but the heat is on, check for a few issues.

Check Wiring

  1. Shut off the power at the fuse box or system switch.
  2. Remove your Nest thermostat display off its wall plate.
  3. Check connectors with a wire are all the way down.
  4. If things don’t appear correct, re-insert the wires, so your connector buttons go down and stay in position. If your connector isn’t all the way down, your thermostat won’t work.

If checking the wiring didn’t reveal an issue, try the following steps:

  • First, ensure your HVAC system doesn’t need maintenance.
  • Next, check for smart thermostats compatibility with your Nest thermostat.
  • Connect a C-wire properly.
  • Install a Nest Power Connector to make installation easier.

Your Nest Thermostat Keeps Restarting

  • If your Nest thermostat cycles on and off or keeps restarting, there could be a power issue.
  • When your nest thermostat has no power or the power is interrupted, it can’t maintain an adequate charge in the rechargeable lithium-ion battery.

Nest Thermostat Keeps Running Your AC

If your air conditioner is continually on, the temperature sensor in your Nest thermostat may be malfunctioning. The thermostat may be reading the temperature incorrectly because of:

The thermostat cooling wires aren’t level against the wall

The thermostat sits close to a heat source such as hot water pipes, electrical outlets, or vents.

If your system uses a heat pump, and it blows cold air when in heating mode, it’s possible you need to adjust the O/B wire settings of your thermostat.

AC Not Blowing Cold Air

If your Nest is set to cool, but no cold air is coming out, you may have a problem with the C-connector.

Use the wiring schematic to double-check the placement of your cables. Check for secure thermostat connectors, straightening and re-stripping any wires that aren’t making good contact, resulting in a totally down connector and no cool air blows.

Furnace Short Cycling With Nest

Suppose your furnace is short cycling and turning on and off frequently. In that case, it is most likely experiencing a maintenance issue unrelated to the Nest thermostat, especially if you have been using Nest for some time.

Check you have the right thermostat connectors if your thermostat was recently installed. If it’s been there for a while, you should be suspicious that your furnace, air handler, or smart thermostat is malfunctioning. (Learn How To Paint A Garage Door)

Why Is My Nest Thermostat Not Heating My House?

The Thermostat Is Not Pumping Hot Air

The first things to check are obvious:

  1. Is there power?
  2. Is a fuse blown?
  3. Have the batteries died?
  4. Plug the device into a wall charger or computer using the USB cable to charge to isolate the problem.
  5. If it turns on, unplug it, shut down the device and restart it.
  6. Plug it back into the USB cable until you have a full charge.
  7. Re-attach it to the wall plate.

Nest thermostat has no power

No Power

When the LED blinks green, you know it’s ready to use.

After a few minutes, the message should change to instruct you to re-attach the display to its wall base. But, again, if batteries power your system, it’s likely that all you need to do is charge the battery.

Using a micro-USB cable plugged into the proper port on your Nest thermostat’s display is the best way to check the battery level. A blinking red light shows that the battery is entirely dead.

You may also have blown a fuse if the Nest thermostat has no power.

The Thermostat Says Heating But Its Not

If your Nest thermostat senses a maintenance problem, it will notify you via its display screen, the Nest app, and monthly Nest Home Report. First, examine your HVAC system for obvious problems such as a blown fuse, low fuel, or an emergency shutdown.

It’s also conceivable that you choose the incorrect wiring diagram during the original setup, especially if this is a new Nest installation that isn’t heating.

You might wish to redo the installation process to make sure you programmed the wires correctly.

Many systems are compatible with Nest thermostats and can improve your indoor air quality and make life easier when things are running smooth, and the cooling behavior is working as you expect.

5 Common Problems With Nest Thermostat

Leave a Comment

Your email address will not be published.