2x light structural lumber (lumber called “two-by”) is sometimes referred to as “sticks” or “studs” by contractors and real estate developers alike. The cost of dimensional lumber is inexpensive compared to better quality wood; it is strong, and ideal for most home improvement projects.

Most 2x timber sold at home centers is made from spruce, pine, or fir trees, depending on the type of wood available from most national home improvement chains across the United States and Canada. It doesn’t really matter to us because all three species are highly similar. The strange “SPF” designation is explained: S=Spruce, P=Pine, and F=Fir.

Another label on 2x timber that may be perplexing is the board length. Some 2x boards are cut to 96″ (8 ft.) in length, while others are oddly shorter. When we’re building a workbench or a shelf, the length of a board may be irrelevant, but the length of a board is vital when putting up a wall. In our guide, you can learn more about this type of dimensional lumber board stud and how many studs in a bundle you’ll get of a specific size.

By the end, you’ll be able to calculate how many sheets or a number of studs needed of a common length that are rough sawn you need. (Learn How Many Bundles Of Shingles In A Square)

Also, based on a bundle size, you’ll take the prices estimating the cost for your individual hardwood lumber bundles to complete your home improvement task.

## What is The Number of 2x4s In A Bundle?

There are about 294 2x4s in a bundle.

You’ll find this based on a bundle size of 1,568-footboard measures. One 2x4x8 is equal to 5.33-footboard measures.

Footboard measure is calculated by multiplying the thickness (inch thick), width and length of a board before dividing it by 12.

Bundle size is adjusted for the pre-cut studs or board length, so you’ll get the same number of 2x4s in a 2x4x8 bundle as there are in a 2x4x9 bundle.

Footboard measure is basically a calculation of how many boards of a particular size it takes to build a 12-by-12-inch square block (build a board one-foot square), so the common length average takes on a more significant role in calculating bundle than width and thickness.

## Why Are They Called A 2 By 4?

A 2×4 used to be more or less two inches by four inches when cutting trees for framing lumber in the olden days. Dried lumber became popular at the same time because of its dimensional stability and mold resistance.

## What Size Do 2×4 Come In?

Because of extra milling to get a sanded smooth surface, a 2×4 no longer measures 2 inches by four inches.

Nowadays, a 2×4 maybe only be 1 1/2″ by 3 1/2″ depending on the lumber yard it comes from.

## How Many 2×4 Studs Come In a Bundle?

There are about a full unit 294 count 2×4 studs in a bundle. This is based on a bundle of lumber size of 1,568-footboard measures.

One 2x4x8 is equal to 5.33-footboard measures.

## How Many 2×4 Studs In A Unit?

You’ll find a full unit count 294 count 2X4 Studs in a total unit count.

Besides this, you’ll find the different quantities here:

- 2×12’s come in units of 84
- 4×4’s come in units of 60.

## How Much Is A Bundle Of 2x4s?

When building, you’ll need to know how much is a bundle or a unit of lumber so you can calculate the prices of wood type, be it Oak plywood or the lumber prices if purchasing yellow pine from a lumberyard or the difference in lumber prices from home improvement stores.

Besides this, the most extended length could give you more than a standard bundle if you can cut the wood to sizes you need rather than buying more bundles of 2×4, which are shorter.

Longer can facilitate hauling as it won’t be as bulky with shorter lumber size, qty increasing. (Learn How To Clean Stove Drip Pans)

## Estimate Prices of Dimensional Lumber

Board Stud* 8′

- 2×3 = $1.86
- 2×4 = $1.90 to $2.16
- 2×6 = $3.70 to $3.84

## How Many Pre Cut Studs In A Bundle?

In a full unit 294 count, you’ll have 24 pre-cut studs per bundle.

## What Is The Length Of A 2×4 Wall Studs?

The most common length and dimensions are 2-by-6 and 2-by-4. The standard wall studs for an 8-foot wall are 92 5/8 inches wide.

The studs in homes with 9-foot walls are 104 5/8 inches. Pre-cut studs measuring 116 5/8 inches are used in homes with a wall height of 10 feet.

## How many studs do I need?

You need to calculate the studs, and to do this, multiply the total wall length (in feet) by 0.75, which will give you a 16-inch on-center stud spacing.

You’ll need to use three studs for every 90-degree corner and four studs for every 45-degree corner.

Use two studs for the wall you estimate size and lumber prices on each intersection.

## What Is A Unit Of Lumber?

In the United States and Canada, the board foot or board-foot is a unit of measurement for the volume of lumber. It’s the volume of a one-foot length of a board one-foot-wide-by-one-inch-thick-board.

## How Many 2x4x10 In A Bundle?

There are in a unit 294 count 2×4 in a normal bundle based on a bundle size of 1,568-foot board measures.

One 2x4x8 is equal to 5.33-foot board measures.

## How Many Boards One Foot Wide In A Unit Of Lumber?

Board Measure: This phrase refers to the board foot as the standard unit of measurement for most lumber items.

A board foot is a one-inch-thick (nominal) by one-foot-wide (nominal) by one-foot-long (actual) or equivalent piece of wood. A 2 x 6, for example, equals one board foot every foot in length.

How Much Does A Bundle Of 2X4 Studs Weigh?

A bundle of air-dried Southern Yellow Pine 2x4x8s will weigh over 3,500 pounds, as you’ll find it comes from the formula of 294 x 12 pounds per board.

In comparison, a bundle of 2x4x8 Sitka Spruce lumber weighs 2,350 pounds at a board size of 294×8, which would be lighter than a similar square foot of Oak plywood. (Learn What is Perlite and Why Your Garden May Need It)

## How Will An 8 ft 2×4 Weigh?

There could be a difference in the type of wood you need to make your square feet. However, you will find an average weight of an 8-foot 2×4 is around 9 pounds.

However, you can find quite the curve here. For example, if you have a bundle of 2x6x16, it could be 14 – 26 lbs.

Wood is like a gigantic sponge, soaking up moisture from anywhere it can come from around lumber yards.

A kiln-dried bundle of 2x6x8 weighs roughly 14 lbs, while a pressure-treated 2x6x8 weighs around 26 lbs.

Luckily, lumber prices are not based on weight, and the lumber prices come from the wood type and the dimensions. (Find the Best Respirator For Woodworking)

## Board Feet Formula

First, find the board’s longest length in feet. Use accurate foot dimensions. For example, 12′ 3′′ becomes 12.25′.

- Then measure the board’s width in inches. Again, measure precisely.
- If the board’s width taper from end to end, measure both ends and divide by 2 to get the average width.
- Decide on a quarter-inch count (board thickness). If the lumber is surfaced, round up to the nearest quarter.
- If the wood is rough cut, record it to 1/4′′.
- The count is 8/4 if your tape measures 1.875′′ on surfaced lumber, and leave as a fraction (do not reduce it to 2)
- Most board footage computation problems are because of a count inaccuracy.
- Unlike width and length, count is not accurate. The exact measurement is quartered and will give you a different quantity.
- Also, certain oddities are not intuitive.
- For example, if a board one foot wide is 1.625′′ thick, it rounds up to 8/4 count unless the seller specifies otherwise.
- Hardwood lumber is typically counted as 4/4, 5/4, 6/4, 8/4, 10/4, 12/4, 16/4.
- Lumber is sometimes marketed in odd counts as 3/4, 7/4, 9/4, 14/4, etc.
- Subsequently, multiply width (inches) x count
- Finally, divide by 12