One thing many homeowners face is mold growth. It is a common problem in areas that have high moisture levels such as kitchen, or in most cases, the bathroom.
It can spring up anywhere, yet you tend to see it on your walls near your ceiling, or close to the floor. You can also see it creeping along the walls next to your baseboards.
It can manifest in any area that has high temperatures and poor ventilation. Because the mold spores are microscopic, they can be airborne and will find a home on any of your walls where the ideal conditions are met.
Here, in this guide, you can find how to get rid of mold on the wall. You can also find other useful information when you need to deal with mould removing from your home.
Risks of Black Mold
There is no question that black mold looks horrible; however, it is the health risks it poses to every member of the household if it isn’t dealt with quickly.
You do need to take care when dealing with this as it can quickly contribute to any of the following.
- Coughs and sneezes
- Irritation of the respiratory system
- Contracting skin disorders, and can include rashes
- Chronic fatigue
- Headaches and nausea
More extreme reactions can lead to vomiting, bleeding in the lungs and from the nose.
What Kills Black Mold on Walls?
Removing mold takes much more than wiping it, and also because water leaks can cause it, you need to make sure you don’t have any leaks before you proceed.
Here are the steps you can follow if you are an accomplished DIYer.
Locate the Moisture Source: You do need to identify if you are dealing with black mold. You can tell this by a damp, musty aroma. When locating black mold, you find it in areas not often frequented. Basements or rooms of excessive humidity, such as faucets, exposed plumbing, and water heaters are all areas where you can see these mold infestations.
Protective Clothing: Just like you are doing any DIY, you need the right protective clothing.
Wear respirators or masks as protection from mold spores. Wear long clothing that covers all your skin and goggles for eye protection. Finally, it would be best if you had a good pair of rubber gloves. (Learn How To Get Bleach Stains Out Of Clothes)
Preparation: Preparation is key to effective mold removal. Make sure you turn off your air conditioning, seal any doorways leading further into your home and use an exhaust fan that faces outdoors so the spores will leave your home.
Testing for Moisture: Unless you know it is just damp, you need a moisture test to be sure there are no leaks behind drywall. Spray the mold with water to prevent the spores from becoming airborne, and be careful not to touch the mold. (Read Hydrogen Peroxide Laundry )
Treatment: You can use effective homemade solutions as a treatment. One-part baking soda with five parts distilled white vinegar along with five parts water. Place these in a spray bottle.
Spray and let it sit for 30-minutes to one-hour. Gently scrub the area with a clean sponge or scrub brush. Let the area dry and repeat the process as required.
Clean Your Area: The area of mold removal needs cleaning before you remove your door seals. Once you remove the mold, remove your protective clothing and discard all your cleaning materials properly. Make sure the room is as dry as possible upon completion.
Is Bleach or Vinegar Better to Kill Mold?
Many people may say bleach kills mold, yet you may find it does nothing more than removing its color. Because of this, you can have black mold that has turned white, and you think it has gone. (Read Handy Hydrogen Peroxide Uses)
Vinegar is far more effective as it can penetrate surfaces that Chlorine bleach can’t. You do, however, need to be careful where you use vinegar as it can affect marble or granite surfaces.
You can spray the area with vinegar every couple of days to combat the growth of the mold. While the bleach won’t kill mold, you can use a bleach and water solution to sanitize the area after your remove mould.
Is it Safe to Clean Black Mold Yourself?
If you are careful and follow the steps above, you can be effective when you remove mold. However, there are reasons it may be better to leave this for professionals.
You can find this true if you look at how to get rid of basement mold as this can recur if you are not careful.
Here are a couple of reasons professional help may be best in your basement.
- Make it worse: Mold releases spores when touched, and if you scrub too hard, you can cause it to spread.
- Miss hidden mold: It is easy to miss mold you can’t see. So, no matter how much you clean, the hidden mold can come back to areas you have treated.
- Wrong equipment: A professional will use industrial dryers and extractors to contain any spores. Using these means they can be sure your area is free from traces of mold.
You can find mold on any walls, particularly drywall. Such walls absorb moisture and water so that they will be wet on both sides. Besides, if the environment is warm, this creates the ideal breeding ground for mold on the side you can see, and more importantly, the side of your walls you can’t see.
To remove mold, you need areas that are dry and free of water or humidity, and this can mean the installation of an exhaust fan in kitchens, bathrooms and basements.
If your walls are not fully dry in every area, you can find this problem a regular occurrence. Thus, it may be time to carry out some home renovations to make certain your humid areas can remain dry when in use or not at any time of the year.
Read more Cleaning Guides