How To Clean Gold Chain

When you have a gold chain, you can find it loses its shine, and even using a polishing cloth does little to restore this to the original look as the first gets deep inside.

Much of this dirt and grime comes from oils in the body, which get inside all the chain links.

You can find many cleaning methods, yet some are not suitable if you have gemstones on your chain. While many individuals may take their jewelry to jewelers who uses an ultrasonic cleaner, there isn’t any need for this expense.

gold chain jewelry on cloth

Solid gold doesn’t tarnish, and it is easier to care for than silver. When it loses its luster, it is pure dirt. Luckily, we have some of the best methods to clean the gold chain with ingredients gently you will have around your home. (Learn How to Clean Mold From Wood)

How Do You Clean a Gold Chain at Home?

Without using commercial cleaning products or an ultrasonic cleaner, you can quickly clean your gold jewelry at home when you follow these simple steps:

  1. Mix a drop of Dawn dish detergent in warm water. Make sure not to use hot water
  2. Add a few drops of ammonia to the solution
  3. Carefully brush using a new baby-sized toothbrush with soft bristles
  4. Once brushed, place the chain in lukewarm water to rinse
  5. Leave the chain to air dry or carefully towel-dry with a paper towel or regular lint-free cloth

Once you’re satisfied with the cleanliness, you can give the chain a final rinse and pat dry. You can then use a jewelry polishing cloth to buff the gold chain to enhance the shine.

You can always skip adding the ammonia if you don’t like the smell, or your chain isn’t that dirty. Just dip your pieces in the dish soap and water solution.

There are several things to remember when cleaning gold jewelry. When using soap, keep away from soap that contains unknown ingredients.

Regular Dawn dish soap is fine; however, remove your gold jewelry before you shower as it can accumulate a film from other soaps and body washes. (Learn How to Clean Bathtub Drain)

Chlorine is another compound that can affect the appearance of your gold, particularly if it’s been used in a hot tub. The high temperatures can permanently damage or discolor gold jewelry.

Pure gold won’t tarnish, yet most gold you purchase can contain other metals to make it harder and cheaper. You should know the percentage of these other metals mixed into the gold, so there won’t make your jewelry tarnish.  (Learn How Much Liquid Chlorine For 10000 Gallon Pool)

Gold Jewelry containing colored gemstones can affect the way you clean your jewelry. It is safest to ask a jeweler about the gemstones you have and the safest DIY cleaning method you have.

Many natural gemstones will be treated or enhanced following their mining, and it is this that may have an impact. Pure diamonds don’t suffer from these problems and can withstand any cleaning method.

 

How Can I Make My Gold Shiny Again?

There are a couple of ways you can remove the gunk and make your gold shine again. Here are a couple of cleaning solution methods you can use so you don’t need to visit your jeweler for polishing.

Boil with Baking Soda

In cases of your chain having a severe buildup of soap or dirt, you can use this simple boiling chain method with baking soda.

  1. Place your chain inside an enamel or glass pot and fill it with water.
  2. Heat the water, then add in 1-2 tablespoons of baking soda
  3. Start boiling the water and let the chain soak for a few minutes so the dirt will break away from your chain links
  4. Dry and polish after rinsing under cold water

Toothpaste

Some individuals have found toothpaste a good solution to clean gold jewelry. All you need to do is apply toothpaste to the chain, then lightly rub it with a soft toothbrush. Once you finish, rinse in warm water and pat dry.

If you do this regularly, it can stop the buildup of dirt; however, there are reasons not to use this method. Your toothbrush can cause micro-scratches depending on how pure your gold is. Some kinds of toothpaste these days contain micro scrubbing particles, which can cause the same issue.

Can You Use Vinegar to Clean Gold Jewelry?

Cleaning gold chains that contain gemstones can be done easily with white vinegar. All you have to do is place your jewelry in a jar of vinegar, then let it sit for 10 to15 minutes in the solution for it to be effective.

You can shake the jar to loosen the grime.

Once you have done this, you can drain the vinegar mixture and scrub gently with a soft-bristled tooth brush to avoid damage before rinsing if required. You can also use this method for rings with gemstones as well as chains. (Read Baking Soda and Vinegar to Clean Garbage Disposal)

What is the Best Homemade Gold Cleaner?

Here you can find the best way to clean jewelry at home. It takes a little more prep time and components, yet it is more effective than many other cleaning methods and doesn’t need you to visit a jeweler.

The way this works is the salt, baking soda, and aluminum foil, when combined, will create ion transfers. The chemical exchange that happens helps to clean your jewelry naturally.

Materials Required

  • 1x tablespoon of salt to clear the dirt and grime
  • 1x tablespoon of baking soda to help clean the metal
  • 1x cup hot water
  • 1x dry lint-free cloth

Instructions

  1. Cover a small glass bowl with aluminum foil
  2. Add the salt and the baking soda
  3. Heat your water in the microwave for 2 minutes
  4. Add the hot water into the aluminum foil-covered bowl containing the salt and baking soda
  5. Soak the jewelry for 10 minutes in the liquid
  6. Remove and rub any excess debris or tarnished areas with a soft cloth
  7. Rinse under warm water
  8. Dry with a soft cloth

Make sure not to soak for longer than 10 minutes; this is important if you have gemstones on your chains or rings. Stones can come loose depending on how they are fixed to your pieces.

How To Clean Gold Chain (1)

Leave a Comment

Your email address will not be published. Required fields are marked *