How To Clean Shower Tiles Without Scrubbing

Have you ever wondered if there is a less arduous approach to clean shower tiles than scrubbing? Once you have a shower, the tile walls and tile floors should be easy to keep clean yet soon accumulate stains from hard water, and soap scum and grout appear grimy.

When you whip out a sponge to start scrubbing, it can be exhausting, and that’s without touching the shower floor tiles. With just a few simple tips and tricks, it can be easy to keep your shower clean, thus avoiding all the scrubbing.

In our guide, you can learn more about how to clean shower tiles without scrubbing shower for hours. By the end, you’ll have a range of ways you can remove stubborn stains every time you have a shower or regularly.

Out of the ways listed, you’ll quickly find the easiest way to clean grout without scrubbing. (Learn How To Clean Headlights With WD40)

Baking Soda Paste for cleaning shower tiles

What Is The Easiest Way To Clean A Tile Shower?

Have you ever wondered if there is a less time-consuming alternative to clean shower tiles without extensive scrubbing to get them clean?

Tile flooring, as well as walls, are long-lasting and easy to keep clean. However, tiles erode, and the sheen diminishes, exposing dirt accumulation. Here are some of the best ways you can clean shower tiles without scrubbing more than you need to.

Baking Soda Paste

Baking soda, commonly known as bicarbonate of soda, is a powerful odor and stain remover for cleaning shower tiles.

  1. Make a paste with baking soda and water to a consistency like toothpaste.
  2. Apply the paste to the tile grout areas until all of the areas that need to be cleaned are completely covered.
  3. Spray the baking soda paste over the tiles with your vinegar spray solution if you need to improve cleaning effectiveness.
  4. You’ll observe some bubbling as the vinegar reacts with the baking soda, which helps to gently pull the dirt from the surface.
  5. Wait a few minutes, then wipe the baking soda mixture off in a circular motion with a rough/coarse-textured clean cloth.
  6. Rinse the area two or three times with warm water to remove any dirt and baking soda residue, then pat dry with a dry towel to stop moisture build-up, leading to mildew growth.

Hydrogen Peroxide

Hydrogen peroxide is a commonly available and environmentally friendly product. It’s also a more cost-effective cleaning option than store-bought alternatives for removing accumulated dirt.

  1. To make a cleaning solution in a spray bottle, add 1 part hydrogen peroxide to 2 parts water (1 cup of water for each half cup of hydrogen peroxide)
  2. Using your spray bottle, spray around your shower tiles and allow 30 minutes for the spray to dry on your shower tiles.
  3. Scrub the dirtiest places to eliminate soap residue and completely clean the tiles.
  4. Rinse with clean water.
  5. Dry the tiles with a clean towel and soaking up any water from the tile grout.

You can increase the cleaning ability for tile grout.

  1. Add one part hydrogen peroxide, two parts baking soda
  2. Apply the hydrogen peroxide and baking soda paste to the grout for around 30 minutes.
  3. Wipe the paste away with a rough textured cloth, and then wash the tiles and grout with warm water to get rid of any hydrogen peroxide and dirt residue.
  4. When you’re done, use a clean towel to dry completely.

Dishwashing Soap & White Vinegar

  1. Combine white vinegar and 12 ounces of dishwashing soap to make a cleaning solution.
  2. Microwave your dish soap mix for a couple of minutes.
  3. Pour the solution into a spray bottle and shake it well to combine the ingredients properly.
  4. Spray the cleaning solution on the tiles to eliminate dirt.
  5. Rinse and dry thoroughly.

If you have sticky dust in your grout line, use the above baking soda mix to get rid of this embedded dirt.

Hot Water And Clorox Bleach

This is the best cleaning method to use if you have mildew in your grout lines.

  1. Combine hot water and Clorox bleach in a bucket to make a cleaning solution. A 25% chlorine bleach concentration is excellent.
  2. Scrub the grout stains away using a grout brush. The bleach lightens the stains while also preventing mildew recurrence.
  3. If the mildew persists on the floor, make a paste with toilet paper and apply bleach directly.
  4. Soak the paper in water and lay it on the strained areas for 12 hours while wearing rubber gloves.
  5. To eliminate any remaining dirt, wipe away the paper paste and clean the porcelain tiles and grout line.
  6. Bleach is a harsh chemical that should not be used on all the tiles types as it can change the color of some tiles.
  7. Besides being a disinfectant, Chlorine bleach is an effective technique for cleaning shower tiles. However, because chlorine bleach damages textiles, only use old scrubbing cloths.
  8. To avoid a build-up of chlorine bleach scents, open the windows and keep the shower door open.

Never mix chlorine bleach with vinegar or ammonia-based solutions. Both are harsh chemicals and will release dangerous and foul odors.

Likewise, never use a spray bottle as it can burn your eyes if the liquid from the spray bottle splashes you. (Learn How To Clean Garbage Disposal With Baking Soda And Vinegar)

Magic Eraser to clean shower tiles without scrubbing tile floors

Magic Eraser

  1. The simplest way to clean shower tiles without scrubbing tile floors is to use a magic eraser.
  2. Before using the magic eraser, vacuum the floor and let it dry.
  3. The cleanser should then apply to the mildew-infested region and tile stains.
  4. Let it dry, and then clean the tiled floors with warm water.

Oxygen Bleach

Always use oxygen bleach before using Clorox bleach as it is less harsh than Clorox bleach. The effectiveness of oxygen bleach in eliminating dirt and grime from grout lines and shower tiles effortlessly is well known. Oxygen bleach is available in powder form from most retailers.

Using oxygen bleach to clean unclean shower tiles without scrubbing is easy because it requires less energy.

  1. Mix two-gallon buckets of warm water and three tablespoons of oxygen bleach.
  2. Allow the mixture to sit for at least fifteen minutes on your shower tiles and grout for optimum cleaning power.
  3. Make an oxygen bleach paste with a few drops of water and apply it to the grout and tiles if it is still dirty.
  4. Scrub the tile stains with a little toothbrush.
  5. Allow 15 minutes for the bleach cleaning solution to sit on the tiles evenly and grout before thoroughly rinsing with water. If the stains on the grout are still stubborn, use the following method:
  6. Mix the bleach powder with a little water until a sticky paste develops. Apply this paste with an old toothbrush to the bothersome areas and wait 10 minutes before cleaning it away with a rough cloth.
  7. After completely rinsing to remove paste residue and gently drying with a cleaning cloth or towel, leave the shower door open for a few minutes and open the bathroom windows to air the space as it helps eliminate foul odors.

Alkaline Cleaners

They’re commercial cleaning solutions for persistent stains in the grout that will remove mold and mildew. But, like bleach, these cleaners can ruin the protective coating on porcelain tiles.

When using such things, follow the manufacturer’s instructions. Also, make sure you’ve dressed appropriately for the situation.

Mold and mildew will always grow in the presence of moisture because of frequent use, and the tiles are constantly exposed to water. (Learn How To Remove Slime From Carpet)

You can, however, control how fast and efficiently they grow, letting you keep your bathroom clean for longer.

Shower Cleaning Tips:

  • Using a vinegar solution, spray the shower tiles every day or three times per week.
  • Squeeze or clean your bathroom floor and tiles after you have a shower to remove any debris and soap scum.
  • Instead of solid soap, which leaves a lot of soap scum, use liquid soap.
  • Allow your shower to dry completely—mold and mildew do not thrive in dry shower environments.

Professionals ways To Clean Shower Tile

What Do professionals Use To Clean Shower Tile?

When figuring out how to clean shower tiles without scrubbing, it’s helpful to know what creates the grime and how the pros handle it.

Cleaning soaps contaminated with soap scum may be employed during the cleaning process. Bleach is a fantastic way to clean the grout; however, it only works for a limited time to remove mold.

Mold should be thoroughly cleansed and the grout sealed before being removed from the outside.

Why would a facility that is washed regularly get so filthy? However, the water you use to shower and the wastewater that results are not so clean. The following are the most common reasons for dirty shower tiles:


Taking a shower when you’re filthy might cause the shower tiles to deteriorate quickly. In addition, some people wash their pets in the shower, leading to dirt accumulation.

Hard Water

Water minerals can adhere to the surface of shower tiles, making them appear hazy. Hard water can also cause issues with the showerhead and other fixtures, compromising their functionality.


Any detergent, including soap, should be carefully washed off ceramic or porcelain surfaces. If you don’t, a soapy film called soap scum forms, which attracts more soap and grime.


If the tiler doesn’t buff grout during installation, the film that forms traps dirt on the tile’s surface. Even when dirt is washed away, the grout remains grimy and attracts filth.

Steam Clean Shower Tiles

If your DIY remedy isn’t working and you don’t want to use harsh chemicals, try steam cleaning, which is what the pros do. (Learn How To Clean A Hot Tub That Has Been Sitting)

Scrubbing tiles, for example, is no longer an arm-wrenching process thanks to the development of steam cleaning equipment. A steam cleaner sprays steam into the grout using high-temperature water. All that’s left is a slurry of filth, which you can easily wash away.

A steam cleaner appropriate for cleaning shower tiles can be purchased or rented, and many of them come with nozzle attachments for different surfaces.

Before moving on to the next, wipe on small sections until they are completely clean.

So that the unclean water does not sink back into the grout, rinse it off the tiles as quickly as possible.

How To Clean Shower Tiles Without Scrubbing

Leave a Comment

Your email address will not be published. Required fields are marked *