Have you noticed that your plants are pleading for water? Have you noticed how the leaves on your plant are curling upwards? Learn how to boost the humidity in a grow tent or grow room if it’s too dry in there.
Every indoor gardener understands that maintaining a consistent temperature and humidity level is critical to ensuring that your plants thrive. Therefore, indoor growers must learn the art of controlling and increasing the relative humidity in their grow tents.
Plants thrive in humidity levels ranging from 45 to 75 percent. However, if your grow tent is barely 20% to 40% full, you must act immediately or risk losing your plants. My plants were drying out since I didn’t know how to increase humidity in my grow tent or room.
Low humidity within a grow tent causes your plant’s growth to be stunted and its development to be stunted. In the long run, it may cause lowering humidity and decreased yields.
Therefore, in a grow tent, the humidity must be increased. You can accomplish this with a humidifier or simple tricks involving home items. (Learn How Often To Water Ferns Outside)
In our guide, you can learn multiple ways of how to change grow room humidity to grow plants larger without introducing potentially harmful elements. By the end, you’ll know how to raise the humidity in grow tent and make sure the humidity inside is enough to stop nutrient burn on your plants.
Can Humidity Be Too Low In Grow Tent?
The amount of water vapor trapped in the air is known as humidity. You can measure humidity in three ways: absolute, relative, and specific. You can also use a hygrometer to determine it, which should be one of your gardening best friends.
We concentrate on relative humidity because we’re interested indoor gardening. RH compares the amount of water in the air to the maximum amount of water held in the air at a given temperature.
Plants can survive at various relative humidity levels, but the temperature in your grow tent is still a factor. Remember that the more water vapor the air can hold, the warmer the air is.
Consequences Of Low Humidity
You can find several reasons you need to raise humidity in grow tent. First, more relative humidity helps plants rather than hinders their growth. However, you will need to measure humidity as you don’t want too much humidity in grow room either.
Here are a few consequences of low humidity in grow room.
Plants use water to keep themselves cool. As a result, they absorb a lot of water, with nearly all of it going to the roots, the vascular structure of the plant, and finally, the stomata. However, only around 5% of the money is set up to create new cells.
There is a considerable vapor pressure deficit between the leaves of your plants and the air due to the combination of high temperatures and dry air. As a result, plants use their stomata to exchange gases.
As a result, your plants are exposed to the arid conditions of the outside world. To counteract the drying effect, your plants will strive to get additional moisture, making it more difficult for them to live. (Learn How Often Should I Water My Vegetable Garden)
Growing plants are stressed due to the extra strain on their roots to soak up water and compensate for the lack of humidity. Plant dryness also causes stomata to close, preventing the plant from absorbing more water.
Lower humidity forces the roots to take in too much water, containing extra nutrients that might burn the leaves’ tips.
Lack of humidity can also cause plant desiccation, which exposes the plant to pest insects such as molds, white powdery mildew, and spider mites.
Importance Of High Humidity In Grow Tent
For new gardeners, high humidity might be intimidating. But, take it from those who have done it before: indoor growers. High humidity levels in a grow tent can be beneficial, especially during the developing phase, as we’ve observed.
Said, exposing your growing plants to a high amount of humidity helps them absorb the water they need to thrive. Plants absorb water through their roots, but their leaves and stems can absorb considerably more.
As previously stated, plants absorb water from the air through stomata, tiny openings on the leaf surface.
Plants will not acquire enough water to finish their development and growth if there is little to no humidity.
Best Temperatures For Grow Tent
Temperature and humidity work hand in hand in a grow tent, and ideally, grow tent temperature changes according to the stage of plant life.
Indoor gardeners naturally invest in a digital thermometer and hygrometer to keep track of readings.
- Clones or seedlings: 74-78 degrees Fahrenheit.
- Vegging plants: 70-78 degrees Fahrenheit.
- Flowering plants: 75 – 88 degrees Fahrenheit.
- The harvesting phase usually needs 65-74 degrees Fahrenheit
Plants, like people, require varying levels of humidity at different phases of their lives.
Because clones or seedlings build their root systems, they require 70 to 75 percent humidity. Therefore, your infant plants will require a lot of moisture in the air, which you can provide with propagation trays or humidity domes. Maintaining high humidity levels improves the chances of your clones rooting.
Because they’ve already formed roots, vegetable plants demand 50 to 70 percent humidity. They do, however, require the assistance of leaves to absorb moisture. As a result, low humidity levels can cause growth to be delayed.
Flowering plants require 40 to 50 percent humidity to thrive in a pleasant atmosphere. You can prevent mildews and molds from growing at this stage by keeping the humidity low.
Harvesting under a grow tent typically necessitates a humidity level of 45 to 50 percent to avoid your crop becoming harsh and brittle. (Learn How Does A Greenhouse Work)
Grow Tents And Relative Humidity To Grow Plants
You can have more control over your plant’s growing environment by using a grow tent and a climate controller. It will also assist you in controlling the light cycles.
Furthermore, boosting or decreasing relative humidity levels is more effortless in a grow tent with a modest air volume.
A grow tent allows you to care for multiple plant species all year long, regardless of the season, weather, or climate zone. It also gives plants the best conditions for absorbing nutrients.
Insects, mildew, mold, and parasites can all hurt your plants, and your grow tent can help to keep them safe.
However, all of this depends on the relative humidity of your grow tent. This is why you should be aware of several methods to increase the relative humidity in your grow room or tent.
Do Fans Increase Humidity In Grow Tent?
Because fast fans constantly bring new air into the grow tent with fresh airflow, you must set the fan speeds to the lowest possible setting. Because of the low fan speed, less airflow in the grow tent.
The humidity in a grow tent air will rise because of this. As a result, humid air will be in regular contact with the growing plants.
Here are other ways you can increase tent humidity in growing tents.
Mix Mature And Young Plants
Larger plants deprive smaller plants of light, nutrients, and oxygen. Because addition, because, especially large ones, respire more and elevate humidity, the relative humidity in a grow tent will rise as you add more plants.
Carbon dioxide and water vapor are released as larger plants respire, feeding baby plants.
Plants with more stomata and larger leaves can emit more water vapor due to evapotranspiration. Your growing plants can then use this water vapor.
Don’t overcrowd larger plants in a small place to ensure they get an equal proportion of air, light, and nutrients and grow properly.
Use Humidifiers In Grow Room
Purchasing a humidifier has proven to be one of the most beneficial expenditures you can make for adequate plant growth. By extracting a cold mist, a humidifier aids in increased grow room humidity levels in a grow tent, which is essential for developing your cannabis plant.
Increase the humidity level of your humidifier to at least 50% to 65 percent, depending on the size of your grow tent.
If you grow, tent includes a top and bottom shelf. Position the humidifier on the bottom shelf to avoid spraying mist straight on the grow lights.
However, it would help if you used caution while using your humidifier. Leaving it on full power in a small area can cause too much moisture and elevated humidity levels inside your grow tent.
If workable, choose a humidifier with a built-in humidistat, which allows the machine to turn off automatically or on based on your chosen moisture levels and ambient temperature.
Buying a humidifier that can hold at least six gallons of water at a time and has long-lasting power is a smart idea to raise humidity.
If you choose the best humidifier, it will help you adjust your grow tent’s temperature, humidity levels, and airflow output. (Find the Best Greenhouse Kit)
Seedlings can germinate on their own, but by utilizing propagators to raise the humidity in your grow tent, you can increase the success rate of growing plants.
Take note of how indoor growers protect seedlings and cuttings in propagators. Seeds can be kept from drying out by using propagators in your grow room.
They may keep your humidity in a grow tent at a higher level, ensuring your seedlings’ root systems are not stressed while they develop and expand into bigger plants.
Build Your Propagation Set-Up
Use a temperature-controlling extractor with a built-in thermostat that pulls air out of the grow room. Place a pail of water on the grow tent and use a garden hose to deliver the water to a humidifier.
The humidifier raises the humidity in the grow tent by extracting a cool-mist inside the grow tent, ideal for seedlings and cuttings.
Use Wet Towels Or Water Trays By Passive Air Holes
Hanging a wet towel or placing a bucket of water near air intakes is one obvious solution for misting down you grow room walls to raise humidity. This permits a significant amount of moisture to be absorbed into the atmosphere.
A towel dries quickly and will need to be re-wet. Furthermore, a pot or pan of water will not always raise the humidity to the right level.
Use a Water Spray Bottle
Spray bottles are frequently available to growers; thus, spraying water on the walls of your grow tent every morning and evening is a simple way to create a humid environment.
Increase Water Sources In Grow Tent
Another inexpensive technique to increase humidity in a grow tent is increasing your water supply and distributing it properly. For example, water trays are frequently placed near air intake tubing or passive air holes.
Similarly, placing damp sponges near growing trays is effective. Over time, heat from a grow lamp, or an air conditioner can evaporate the water in the sponges, making your grow tent more humid.
A gentle reminder to use clean water in your grow tent to avoid the growth of hazardous fungi or bacteria.
Remove Half Your Fluorescent Lights
Regrettably, the most common fixes are frequently missed for young plants. By removing half of your fluorescent tubes, you can lower temps, ideal for younger plants that don’t yet need a full quota of light.
Set Extraction Fan Speed To Minimum
Venting a grow tent is vital since it allows you to better monitor or control relative humidity for your plants. In addition, air moves quickly into and out of your grow tent with proper ventilation.
Thanks to fans, your growing plants will benefit from optimal air circulation and distribution thanks to fans. As a result, when you have sufficient air circulation, you can prevent harmful microorganisms like fungi and bacteria from growing or staying inside your tent.
At various stages of plant development, set fans to a low speed to save moisture. A word of caution: high-speed fans will cause the air to dry out faster than usual.
Water vapor will not linger on the surface of your plant’s leaves and be absorbed if you use high-powered fans.
As a result, the plants get dehydrated and desiccated due to the lack of moisture.
You may also try limiting the number of fans to increase grow tent humidity. To maintain relative humidity in a grow tent, the best settings are around 60%.
Lower Surrounding Temperature
Indoor gardeners are well-versed in how to chill a grow tent to increase water vapor and thus raise the humidity in the process. Still, it becomes more complicated when temperature regulating is involved. Remember, cold air has a higher density than hot air; it sinks to the bottom. Therefore, a lower temperature shows that the air is moist and contains significant water vapor.
Similarly, lowering the UV light intensity can increase water vapor, but only if it suffices to enable water evaporation.
Reduce Temperatures With An Air Conditioner
To keep high humidity in your grow tent, you can increase an air-conditioner’s temperature or reduce the heater’s temperature if you have too much humidity.
However, you can find an air conditioner a costly solution compared to the other ways of increasing humidity in your grow room.