How To Remove A Built-In Microwave

A microwave oven is a kitchen staple and is one of the most used appliances people can’t do without. Some houses have a built-in microwave above the stove to conserve room in a small kitchen.

Like any other household device, the microwave could break down, or you want an upgrade for your cabinet microwave. Thankfully, removing an old microwave and adding a built-in microwave replacement isn’t a challenging process. In most cases, you won’t need to hire a professional to replace built-in microwave.

In our guide, you can learn all you need about how to replacing built-in microwave, and by the end, you’ll be able to quickly whip off the back panel and the vent hood to install your new kitchen appliance. Before you know it, you’ll be upgrading your built-in washing machines as part of your home improvement. (Read Microwave Size Chart)

built in microwave

How Do You Remove a Built-In Microwave?

Typically, removing the old microwave includes removing the mounting brackets and pulling the microwave out of its original position.

Follow the step-by-step procedure here to remove your old appliance safely.

  1. Starts by shutting off your microwave’s power. Next, turn off the circuit breaker supplying power to your microwave.
  2. Unplug the microwave after you have turned off the power. Depending on where the power socket is positioned, you may need to pull your stove out to access it.
  3. Remove the turntable and other loose parts from inside the microwave by opening the door. This will keep them from removing about as you remove the microwave.
  4. Remove the screws that are securing the microwave in position. You’ll most likely have to remove several securing brackets, so make sure you search the entire appliance for them.
  5. After the securing brackets have been removed. Lift the microwave out of its position and set it aside.

After successfully removing the old built-in microwave, the next step is to install your new appliance.

  1. Have a friend or family member pull the microwave near to the mounting plate and thread the power cord through the cabinet hole.
  2. If not, connect it to a power outlet and plug it in.
  3. You can switch the microwave power on at the circuit breaker once everything is in place and set up. Check sure your microwave is working once the power is turned on.
  4. You can now put your new microwave to the test.

How Do You Remove A Wall-Mounted Microwave?

Microwaves that are built-in, over-the-range, or in drawers are among the most difficult to replace in your kitchen, and if you’re not careful, the smallest main item in your kitchen might soon become the most expensive to replace.

Remember that the underside of over-the-range microwaves is not flat and would not provide a sturdy platform and can only be used in a cabinet and not on the countertop.

Here are the quick steps on how to replace built-in microwave.

  1. Remove the oven from the wall outlet.
  2. Remove the microwave oven from the cabinet above it and open it up.
  3. Locate the two screws that hold the microwave in place on the cabinet’s bottom panel and the wall studs.
  4. Lower the microwave until it’s at a 45-degree angle, and you can slide it out from where it was installed.

One tip is to remove everything and tape the door shut, so it doesn’t open and hit you in the face.

How Do You Remove Built-In Microwave With trim Kit?

  1. Remove the trim around your existing microwave first when removing a built-in microwave.
  2. Slide a putty knife about 1 inch underneath one of the frame’s sides. Gently rock it to loosen the trim.
  3. Next, insert the tip of your chisel into the hole formed by the putty knife.
  4. Place a 1/4-inch piece of plywood underneath the chisel to act as a fulcrum.
  5. Then, using the putty knife, pry down on the first side to remove the trim. Follow these procedures carefully to remove any other pieces of trim that are obstructing the removal of the unit.
  6. Remove any nails from the cabinets with diagonal pliers, being careful not to cut yourself if they’re sharp.
  7. Be careful not to harm the trim if you plan to replace it with your new microwave.
  8. Have some wood stain on hand to help fix any dings or scratches generated by this technique on your built-in microwave cabinet.

Remove Your Built-In Microwave

Next, remove the microwave from its wall mount. Depending on the model, your microwave could be hard-wired or plugged in, determining the weight. (Learn How To Remove Ceramic Tile From Wall)

Then, ask for help removing the microwave, as most microwaves are heavy.

Look behind the microwave. If you see a plug in an outlet, it’s not hard-wired; a junction box implies it is.

Then carefully pull the microwave forward enough so that you or your assistant can reach behind it and see if there is a plug. If not, switch off the power to the circuit in question.

If your built-in microwave is hard-wired, you will need an electrician to remove it safely. Here, return it to the recessed opening and await the expert.

if it’s just a plug, unplug the microwave from the outlet, slide it out the rest of the way, and lift it to a level surface.

If you need a step stool, have someone lower the microwave.

built in microwave cabinet

Replacing Your Built-In Microwave Cabinet

If you’re replacing an outdated microwave, choose the same size to prevent pricey cabinetry modifications.

If you still have your microwave’s old box, use the dimensions provided instead of measuring.

Push the microwave partially, then reach back and plug it in.

Replace the trim and use fresh nails of the same size.

Avoid using wood glue, even if it is easier. The wood glue will destroy the trim if you ever need to replace the microwave.

If the old trim is damaged or dusty, you can purchase an adjustable microwave trim kit to make a new set.

microwave

Is It Hard To Replace A Built-In Microwave?

If you’re in the market for a new microwave, you might be wondering how to remove a built-in microwave.

Even the greatest kitchen appliances need replacing at some point, and an over-the-range microwave unit can be notoriously difficult to install and remove.

Removing the trim kit and the built-in microwave oven will take some unscrewing, but the process is significantly easier than installing one. Ensure you’re wearing protective gloves and the microwave oven is turned off.

You should always have another person on standby to remove trim kits and hold any ladder steady. (Learn How Many Pennies In A Square Foot)

Installing and removing a built-in microwave oven is more difficult than countertop microwaves.

For example, if you have a countertop microwave, you may only need to learn how to build a microwave cart or how to place it on a kitchen counter.

To install built-in microwave ovens, you’ll need a variety of equipment, electrical supplies, and other materials.

How To Remove A Built-In Microwave (1)

Leave a Comment

Your email address will not be published.