Stainless steel is a popular brushed finish kitchen material that is favored for its clean look and durability. You’ll find it used in sinks to appliances, worktops, and cabinet hardware.
Stainless steel is very strong, yet it has one flaw: it is prone to scratches from everyday use. Luckily, you can reduce such signs of wear and tear to a minimum, and you can remove scratches on stainless steel.
When you look up close, you can see brush markings on the stainless steel surface, which they call the grain. When cleaning and using any abrasive substances, it is vital to follow the grain.
If you go against the grain, you’ll get scratches, which is why your cookware has scratches from washing heavy pots.
While you can get professional stainless steel restorers, you can use things from around the home. (Learn How To Remove A Rusted Screw)
It is worth noting here that you can find stainless steel, which has been treated with a protective clear coat or synthetic surface and using any cleaning methods means you could cause more damage.
In our guide, you can learn how to remove scratches from stainless steel appliances the right way. By the end, you’ll understand how to have the best-looking stainless steel sink, cookware, or appliances with no excessive effort and using your own cleaners for removing scratches.
How Do You Get Deep Scratches Out Of Stainless Steel?
Here is all you need to know about how to remove scratches from stainless steel
Thanks to its elegant looks and durability, stainless steel is popular for kitchen appliances, cookware, and sinks.
To remove scratches from stainless-steel appliances, use these easy-to-follow steps. Whichever scratch removal method you use, remember not to try them on any stainless steel with a protective clear coat, or synthetic surface applied.
Revere Stainless Steel and Copper Cleaner are among the cleaners you can use to remove slight scratches from stainless steel. Appliance manufacturers do often provide their cleaners, which you can find in home improvement stores.
Stainless-steel polish can disguise minor scratches, yet you’ll need to reapply regularly to keep products looking nice, which can be the only option if you have such protective coatings.
To remove deeper scratches, use a piece of wet sandpaper. Ensure you keep it wet and gently buff the stainless steel surface with your rubbing compound and following the grain.
Start with the scratch and work your way up, and determine the grain’s direction so you can sand in a single direction.
Sanding back and forth is not recommended, as you shouldn’t sand against the grain.
When you need to remove deeper scratches, begin with coarse-grit sandpaper, and move on to a finer grit, and lastly, use your rubbing compound. (Learn How To Remove Scratches From Plastic)
Note: Only uncoated stainless steel panels are suitable for this treatment, and any simulated stainless steel or stainless panels with a fingerprint-resistant clear coat shouldn’t be sanded.
Clean and Polish
You can clean and polish your stainless-steel equipment once you have sanded out the scratches.
Wipe down your recently sanded surface using a clean microfiber cloth to remove any sanding, metal dust, and residual polishing compound.
Spray your metal with multiple vinegar solution sprays, and wipe down with a clean microfiber cloth. Vinegar cleans the surface and removes remnants of any other cleaners or substances you have used.
Once dry, you can use a clean microfiber cloth or paper towel. Add a few drops of oil such as mineral oil, vegetable oil, or olive oil.
Polish the metal with the oily rag in the grain’s direction and adding more oil as required to remove scratches from stainless steel altogether successfully.
Can Bar Keepers Friend Remove Scratches From Stainless Steel?
The well-known cleaner Bar Keepers Friend eliminates and diminishes the appearance of scratches in stainless steel appliances, cookware, and more stainless steel surfaces.
Begin by applying the product to the scratched area of the stainless steel sink and rubbing it in with non-abrasive pads or a 3M Maroon non-abrasive pad while following the grain.
To avoid streaks, thoroughly rinse the cleanser with water and wipe the product dry. Our Stainless Steel Cleanser & Polish will benefit stainless steel equipment in particular.
What You Need
- Soft microfiber cloth or sponge
- Non-abrasive cleanser
- A soft toothbrush and White toothpaste
- Wet-dry sandpaper, 400- to 600-grit
- Sanding block
- Stainless steel polish
Working with a non-abrasive cleanser such as Scratch B Gone is the gentlest way how to get scratches out of stainless steel. Both powder and semi-liquid sanding fluid versions are available, and if you’re going to use the powder, start by making a thin paste with it.
Apply the cleanser to the scratch using your dampened cloth or sponge and rub vigorously in the same direction as the metal’s grain.
Check your progress and gently wipe the cleaner with a wet sponge or damp cloth to see whether the scratch has disappeared.
Finish with a coat of stainless steel polish or olive oil if this technique removes the scratch. If that doesn’t work, try a slightly more abrasive approach.(Find the Best Stainless Steel Micro Mesh Gutter Guards)
Ordinary whitening toothpaste or baking soda is moderately abrasive and contains microscopic grit that can go deeper and is suitable for removing deep scratches on the stainless steel.
- Apply a coat of toothpaste to a soft-bristle toothbrush.
- Brush over visible scratches working in the grain’s direction. Check your sanding technique progress by wiping away the toothpaste with a moistened cloth or sponge.
- Continue brushing, adding more toothpaste as necessary until you remove fine scratches from the area.
- If you successfully remove scratches, protect the steel scrap by applying stainless steel sink polish or olive oil.
- If the scratch is still not removed, using toothpaste or another non-abrasive compound, you need to try a mildly abrasive technique.
- Getting scratches out of stainless steel using sandpaper can take a bit of practice, yet it doesn’t take long to master.
- Use a sanding block with your sandpaper to keep an even pressure.
- Wet the sandpaper and also dampen the scratched area using a sponge.
- Gently rub with light pressure, and sand the scratch in the same direction as the metal’s grain.
- When the scratch is gone, use finer sandpaper and sand lightly across the entire area gently outward to blend the section to the rest of the stainless steel.
- Wipe your sanded area using a wet cloth or sponge. Remember, you are wiping away loose grit, so use lots of water, or you could make the scratch worse if you don’t go in the same direction as the grain.
- Use a soft towel or cloth to dry the affected area.
- Finish by polishing with stainless steel polish or olive oil.