How To Repair Drywall Tape On Textured Ceiling

Peeling drywall tape is the worst thing you can do to a room’s appearance. It’s easy to become oblivious to flaws we see every day, and loose drywall tape repair might not be at the top of your to-do list. However, if left unaddressed, the condition would only worsen.

While it is terrible enough on your drywall wall, the loose tape looks far worse when it’s on your ceiling. To make matters worse, when your entire ceiling has a texture, any work you do to fix the issue could make matters worse.

In our guide, you can learn how to repair loose drywall tape on ceiling. It doesn’t matter if you use paper, dry wall tape, or mesh tape. Most of the steps are similar in fixing issues on texture ceilings.

By the end, you’ll know more than enough on how to repair drywall tape on ceiling before you add a new texture and a fresh coat of paint. (Learn How To Remove Drywall Anchors)

Fix Drywall Tape on a Textured Ceiling

How To Fix Loose Drywall Tape

Loose drywall tape is visible and appears like a bubble in the best-case scenario; in the worst-case scenario, you’ll see loose edges.

The primary issue with leaving peeling tape is that it will cause further damage. Peeling drywall tape repairs is a quick and easy project that you’ll be glad you completed, even if they’re on your ceiling.

What You Need

  • Utility knife
  • Drywall tape – paper drywall tape or mesh tape
  • Vacuum with hose
  • Multipurpose drywall compound
  • 5″ putty knife
  • Sanding sponge
  • Sandpaper
  • Texture and application tools
  • Primer, paint, and tools

Directions

  1. Remove the tape that has been damaged. Cut through the tape with the razor knife; the portion you remove should stretch about one foot from either side of the damage.
  2. Sand the surface to a smooth finish, stopping just short of the drywall. Don’t sand the drywall paper away!
  3. Dust and dirt should be vacuumed away.
  4. Apply a new piece of tape that is slightly shorter than the old one.

You can use Self-adhesive fiberglass mesh drywall tape or paper tape on flat surfaces.

To apply paper tape, first apply a thin, even coating of drywall compound to the seam using the putty knife. On both sides, the compound should extend about 2′′ beyond the joint. It would help if you smoothed out any gaps or air pockets.

Cover the seam with a piece of paper drywall tape. Press the putty knife into the compound with the putty knife. Smooth away bubbles and wrinkles with a soft cloth; these defects can cause the tape to lift again. (Read Drywall Tape Vs Mesh)

It’s simple to use fiberglass drywall tape; place it over the seam and press down to firmly adhere the tape to the surface. Apply an even coating of drywall mud now.

Use paper drywall tape on corners:

  • Decide on the length of tape you’ll need. Make a crease in the center of the tape to create the angle needed for the corner. Thankfully, all paper tapes are pre-creased for this very purpose.
  • Fill the corner with drywall mud, about 2 inches wide on both sides.
  • Smooth the tape into the corner, being careful not to wrinkle it. This will get rid of any mud stuck behind the tape. Make sure the tape well adheres to the surface.
  • Over the tape, apply a coat of drywall compound. It should be thick enough to cover the tape completely. Allow time for it to dry.
  • Using a sanding sponge, sandpaper, or another abrasive, sand the drywall compound smooth.
  • You want to get rid of any prime areas, knife marks, and other flaws. If the paper shows through, stop.
  • Allow for a second thin application of the compound to dry.
  • Sand once more. Integrate the repair’s margins with the surrounding wall. You’ll want to use finer and finer paper to have a truly smooth surface.
  • If required, re-texture the wall.
  • Allow the repair to dry after priming.
  • Repaint the damaged area. You’ll almost certainly need two coats.

Ceiling Repair Do’s And Don’ts

Cracks in drywall and plaster can be caused by bad craftsmanship, roof truss uplift, or water leakage. Repairing cracks in walls is simple, but ceilings, usually textured and overhead, are a bit more complicated.

You can fix ceiling cracks by following a few practical strategies, yet the most challenging part is knowing what to do first, the tools to use, and when to know the job is too big.

Removal of popcorn ceiling

Do

1# Pinpoint the cause of the crack

A prominent watermark on the ceiling suggests a leak caused the joint compound to weaken and shatter. Applying joint compound too heavily causes shrinkage and hairline cracks as it dries. Prevent future fractures by repairing the source of the cracks, such as leaks.

2# Consider removal of popcorn ceiling

Popcorn ceilings, popular in the 1960s and 1970s, gather dust and dirt, and any crack repair will stand out. Because textured ceilings and popcorn texture can devalue a home, now is a suitable time to remove them or replace them with drywall.

Popcorn ceilings installed before 1978 may contain asbestos, so identify the texture before undertaking repairs. It’s advisable to have an asbestos-remediation specialist remove asbestos-containing popcorn ceilings.

Usually, the crack is more extensive, or the ceiling has several cracks. Using the correct tools and materials will help get the most significant results. A 6-inch tapering knife for loose ceiling texturing and peeling paper Fill the cracks with premixed drywall mud reinforced with mesh or paper drywall tape. After the liquid dries, a drywall sanding sponge helps smooth the surface.

Don’t

1# Don’t start without a plan

If the texture of the ceiling is damaged, it may be necessary to scrape away some of the texture before patching it with a product that matches the rest of the surface. Then, after the cracks are repaired, evaluate whether re-texturing or painting the ceiling will be required to complete the effect. Consider all components of the project and the ultimate conclusion.

How to Fix Drywall Tape on a Textured Ceiling

To replace loose drywall tape on a textured ceiling, first cut the loose tape with a utility knife. Then sand the taped area, taking care not to harm the drywall beneath. Install new tape and secure it with 2–3 applications of joint compound.

Then sand the final joint compound coat. Finally, re-texture the area with a texture spray or a texture sponge.

Drywall tape can come off owing to natural conditions like dampness or settling. However, a roof leak may be the culprit. Examine your ceiling if the drywall tape has peeled. A roof leak can leave yellow or brownish water stains on your drywall ceiling, as well as distort and damp the layer.

  • Humidity or settling cause most drywall tape peeling.
  • A roof leak may cause peeling drywall tape.

When removing and replacing drywall tape, look for water stains to see if a roof leak exists.

The drywall tape will only pause the leak. A roof leak will destroy your repairs and cause long-term harm. If your roof leaks, call a professional.

Steps For Fixing Drywall Tape on Textured Ceiling

A textured ceiling repair task may appear overwhelming. After all, how will you be able to match the surrounding ceiling? It can be a straightforward DIY project with the right tools and techniques.

Things You Need

  • Ladder
  • Drop cloth
  • Eye protection
  • gloves, and a dust mask
  • Utility knife
  • 120, 150, and 220 grit sandpaper
  • Drywall tape – you can use paper tape or mesh drywall tape
  • 3-inch putty knife
  • Joint compound or also known as drywall mud
  • Spray-on ceiling texture or a texturing sponge

How to fix a crack in ceiling drywall tape

Remove Damaged Tape

Using your utility knife, scrape away the loose tape from the ceiling crack. Cut the loose tape back to the ceiling, leaving no loose ends near the walls, and the ceiling surface is flat.

  • With a utility knife, remove the loose tape.
  • It’s time to get rid of that loose drywall!
  • Do not repair loose drywall tape by repositioning it with the joint compound.

Removing broken or loose tape is far more effective than trying to put it back in place with a joint compound. Laid-back drywall joints with unfastened tape are uneven. This type of tape repair is prone to re-loosening. (Read Joint Compound Vs Drywall Compound)

Sand the drywall seam

Sand the Area

Sand the drywall seam where the loose tape was removed. Sand the area with 120 grit first, then 150 grit to smooth it. Avoid sanding through the drywall’s paper layer. The idea is to clean out any old joint compound from the drywall seam before making repairs.

  • Sand the tape removal area with 120 grit sandpaper or this sanding block.
  • Sand away any remaining joint compound without sanding through the drywall paper.
  • During this operation, some ceiling texture will be removed.
  • Whenever you sand drywall or joint compound, wear protective gloves and a dust mask.

Don’t worry if you remove any ceiling texture around the seam while sanding. After the restoration, you will texture match the ceiling. Use a drop cloth on the floor as your whole room can be covered in dust. Seal off any doorways as dust can travel around your house.

Install Your New Tape

Use self-adhesive mesh drywall tape to re-tape the joint. Make sure not to overlap new tape with existing tape at either end of the repair area. There can be a 1-inch (2.5 cm) gap between the old and new tape.

  • Taping the joint is easier with mesh drywall tape.
  • Tape the exposed seam without overlapping the old tape.
  • Smooth the surface of the tape with your putty knife.

After taping, apply a thin coat of joint compound over the tape. Work to create a smooth surface that matches the sanded area surrounding it. Start with a bit of joint compound and wait until it is completely dry.

Add More Joint Compound

Work in increments to patch drywall seams. Don’t fix the seam with one coat of joint compound. Instead, apply more joint compound to glue it in place and let it dry. After 24 hours, sand the joint compound using 150 grit sandpaper and reapply. Repeat this step 2–3 times for a smooth seam.

  • Apply joint compound on a drop cloth on the floor below.
  • Putty the repair patch in 2–3 coats, building it up in stages.
  • Allow 24 hours between coats to dry.
  • Sand softly between applications with 150 grit sandpaper to avoid accumulation and laborious sanding.

Bit by little and sanding between applications, the joint compound can be built up to match the surrounding ceiling. This distinguishes a mediocre repair from a faultless one.

Sand Your Joint Compound

Wait at least 24 hours after your final coat of joint compound before sanding. When sanding, start with 120 grit to remove lumps and ridges, then 150 grit to smooth the edges, and 220 grit to achieve a completely blended surface.

  • Sanding after 24 hours is advised.
  • First, smooth the joint compound with 120 grit sandpaper to remove ridges and major flaws.
  • Rectify any grooves or gouges left by 120 grit using 150 grit.
  • Finish with 220 grit sandpaper.

After this, you will have a professional, smooth finish. This taped and floated seam will last for years. Your ceiling is now ready for texturing.

Apply texture to a ceiling quickly

Add Your Room Texture

There are two simple ways to fix a textured ceiling at home. First, use a spray texture product to apply texture to a ceiling quickly. To make a textured ceiling, use a joint compound or a unique texture patch product with a texturing sponge to reapply texture to the smooth area.

  • This spray texture can be used to texture a patched ceiling.
  • You may also use it to texture your ceiling.
  • Dab the texturing sponge on the ceiling to imitate the surrounding texture.
  • When adding texture to a ceiling, use a drop cloth.

Adding sponge ceiling texture takes practice. Test it on a piece of cardboard first before moving on to your ceiling. Experiment with dabbing texture on the cardboard and scratching excess with your putty knife. Wait 15–20 minutes after applying the texture before scraping away the excess since the result will be semi-hardened.

If you need to, you can finish with a coat of ceiling paint to cover any final blemishes.

How To Repair Drywall Tape On Textured Ceiling

Leave a Comment

Your email address will not be published.