How To Seal Acrylic Paint On Leather

Acrylic paint may be used to paint soft surfaces, such as leather and fabric. Another common choice is leather paint; however, acrylics are similar and far less expensive. Acrylic paint also comes in a variety of rich and colorful colors, giving you more options for paint tones.

However, the success of your project will be determined by your application technique. The paint will not adhere to the material for a long time if it is not prepared correctly. So, after you’ve painted leather using acrylics, you’ll need to seal it.

In our guide, you can learn all about preparing leather for your next leather painting project. From leather shoes to leather jackets to leather furniture, you can find how to use leather medium, leather paints, and how sealing acrylic paint makes your design last. (Read Does Water Stain Leather)

Tips in Painting Leather with Acrylic Paint

Painting Leather with Acrylic Paint

You can learn how to restore the brilliance of leather by painting it. Acrylic paints, such as Angelus leather paint that are specially made to seep into and tint the soft surface of leather, have been around for almost a century and are available online and in local craft stores. You can use standard acrylic paints as long as you stick to the proper steps.

You can give worn leather a new lease on life by applying a fresh layer of paint to it without harming the material. The first step is to learn how to paint leather with acrylic paint.

Things You Need:

  • Water-based acrylic paint
  • Paint brush
  • Wool dauber or towel
  • Painter’s tape (optional)

The basic steps cover any leather pieces, yet can differ slightly if painting shoes or a leather jacket.

Clean the Surface

  1. Clean the leather before you paint using one part leather bleach with one part water.
  2. Wipe the leather surface clean using a wool dauber. If you don’t have a wool dauber, use a towel.
  3. You may need to use isopropyl alcohol to wipe the surface if they come with a protective coating. The silicone coating will stop any acrylic-based paints from sticking to your paint job.

Prepare Work Area

Because acrylic paint is difficult to remove, you’ll want to cover your work surface. To keep the paint from getting on anything, lay down tarps or drop cloths and wear protective clothing.

Paint the Leather

The finest paint for leather is acrylic paint. Select the best water-based leather paint for your project.

  1. Apply a single coat of undiluted acrylic paint direct to the leather surface. Add more coats as needed, but wait at least two hours for the paint to dry completely before applying another.
  2. For the best results, paint thinly in light applications in the direction of the leather’s flex if painting leather shoes as more cracks will appear with thick paint.
  3. Mark off the area you don’t want the paint to go.
  4. For the first coat, mix water-based acrylic paint with equal parts of water to get diluted paint if you’re having difficulties getting the paint to stick to the surface. Wait five minutes before applying the undiluted paint to the rest of the leather surface.

Seal Acrylic Paint on Leather

Seal and Cure

After the paint has dried completely and looks the way you want it to, you’ll seal it. Before applying the finisher, make sure there is no dirt or dust on the surface. (Learn How To Remove Paint From Leather)

How to Seal Acrylic Paint on Leather

You must seal acrylic paint to the leather to prevent it from cracking. The ideal tool for the job is a sealer or an acrylic paint finisher from your local craft store or online.

Clean and Dry Leather

Before applying the paint, check to see if the leather is clean. Any dust or particles on the material will become trapped if you skip this step.

Seal the Paint

When painting on leather objects, use a liquid paint finisher or spray sealant in light coats.

  1. Use an ounce of acrylic paint finisher per one part of water. Apply a light coat with a wool dauber, yet ensure you don’t over soak your leather.
  2. Wait five minutes between coats before a fresh coat, and build up the sealant in bursts of 20 applications.
  3. Alternatively, you can use a spray gun to coat the surface quickly. The transparent protection is available in gloss, satin, or matte. Ensure the spray sealant works with leather.

Add a Waterproofing Spray

  1. Apply a waterproofing spray final to help the paint last. The coating protects, protects, and resists moisture.
  2. General retailers sell a waterproofing topcoat as brush-on fluids or aerosol sprays. It doesn’t matter. Make sure the brand you chose works with acrylic paint.
  3. Apply the waterproof coat as directed on the bottle with an aerosol, point, and spray. Dry the coat for 24 hours for complete moisture resistance on leather acrylic paint.

How Do You Keep Acrylic Paint From Cracking on Leather?

Over time, leather shoes grow dirty. It’s tempting to recolor a favorite pair of shoes or paint a minor detail to make it stand out. Shoes painted with acrylic paints look great.

Step 1: Prep Your Shoes

To begin, you’ll want to clean the shoes carefully. You can clean the leather using a leather bleach and water solution or with isopropyl alcohol.

To remove oils, waxes, and other coatings from the leather surface, dampen a towel with alcohol and wash it down. Isopropyl alcohol should aid in the adhesion of your paint to the leather surface.

If your leather shoes are shining, you’ll need to sand them before painting lightly. The shiny coating on your shoes should be removed using 100 to 200 grit sandpaper.

Before you paint, check the leather surface is clean. Using a moist towel, wipe it down to get rid of dirt and dust before applying acrylic paint on leather shoes.

Step 2: Apply Your Paint

Acrylic paint for leather can be purchased at a craft store or online. Any other form of paint may not sink into the leather and may impair the material’s suppleness over time, causing cracking.

Mix the paint with equal parts of water to thin it out. This stage aids the leather’s absorption of the paint. You may use a mixing bowl for this.

Then, dip your paintbrush into the bowl and apply thin, equal coats of paint. At first, the oil paint may come through, but this is typical. Concentrate on achieving consistent coverage and long strokes.

Depending on your tastes, use acrylic paint from Angelus Paints for high gloss, satin, or matte finishes. (Learn How To Remove Super Glue From Leather)

Step 3: Finish the Leather

When the shoes are completely dry, they can be finished with an acrylic leather finisher. The substance aids in the smooth application of paint by sealing it to the material and creating a seamless surface. It also protects the paint from water, but not as much as a waterproofing spray.

Apply the leather finisher in thin coats over the paint with a sponge brush. Fill in any seams for a smooth finish. It takes 24 hours for the sealant to dry.

Painting Faux Leather Shoes

You might have imitation leather on your hands if the acrylic paint doesn’t stick to the leather. Faux leather is frequently coated with a silicone or plastic polymer layer that is difficult to remove with isopropyl alcohol.

Clean Artificial Leather

Clean your shoes with isopropyl alcohol and a damp towel or use a leather deglazer before applying acrylic paints. It can take a leather deglazer to remove a silicone finish should alcohol not work.

Most leather deglazers need rubbing into the leather using a rough cloth. If this isn’t enough, use fine sandpaper to remove the coating for your acrylic paints to stick.

Painting leather shoes

Paint Shoes

Apply acrylic paint works well on faux leather shoes as it does with real leather. To evenly distribute the paint throughout the shoe, use lengthy, vertical strokes. Because the paint may dry quickly, you may need to work swiftly.

Allow 20 minutes for each coat to dry before adding another layer. Adding extra layers to the paint color makes it appear more vibrant and saturated.

If you make any mistakes, erase the paint with acetone. Smooth leather will be easier to paint compared with rough leather with grain.

Prevent Acrylic Paint from Cracking

Here are a few tips to keep your freshly painted shoes from cracking. Acrylic leather paint is less prone to crack, but leather paints resist peeling and chipping better.

The best way to paint shoes with acrylics is in thin coats on top of a fabric medium made for leather. Paint in thin layers the same as you would on leather coats and in the flex-direction to prevent cracks.

Can You Paint on Leather Jackets with Acrylics?

Use acrylic painting instead of leather dyes on leather jackets. You’ll find most leather jackets have designs that are hand-painted with acrylic paint on leather.

Prep the Jacket

Clean your leather jacket with isopropyl alcohol before painting it. If the material still shines after wiping it with alcohol, sand it. Sandpaper the coating off. Gently sandpaper in circular motions for a few minutes. Prep the leather jacket with a moist towel before you use acrylic paint to remove any residue.

Paint Your Jacket

Use acrylic paint with a small paintbrush to get the best detail.

Dip your paintbrush into the undiluted acrylic paint and apply only a light coat. If you miss or make a mistake, wipe the mark away with a moist towel. Allow the jacket to dry after the first coat. Continue until you have three coats.

Dry Acrylic Paint on Leather

To avoid cracking or smearing the paint, don’t touch it as it dries. For optimal effects, let acrylic paint dry on leather for several hours before moving it. (Read Difference Between Enamel And Acrylic Paint)

The sealant or leather finisher needs to dry for 24 hours. Waterproofing sprays also dry after 24 hours. Some suggest you should wait 48 hours before touching or cleaning the item.

Never use heat or direct sunshine to speed up acrylics paint drying as it can cause damage.

You have many top brands of acrylic paints, and they can all benefit from good preparation. Apple Barrel Paint, Golden High Flow Acrylics are among the best and deliver premium results.

How To Seal Acrylic Paint On Leather

Leave a Comment

Your email address will not be published.