Dishwashers are modern plumbing and electrical marvels and make clearing up after dinner a breeze.
However, we often take these appliances for granted and never give them much thought apart from regular cleaning. So, it comes as a shock when things break.
One thing that can cause a fair amount of disruption is when the small soap dispenser has a fault and can render your machine out of action while you figure out how to get it fixed. You’d be surprised at how common it is for individuals to look at how to use dishwasher with broken soap dispenser, even if the reasons differ.
One such issue is the dishwasher soap dispenser not closing. Likewise, you can have your dishwasher soap dispenser, not opening. Either way, it’s tricky to get your dishwasher detergent door to hold stuff in the compartment so you can wash your dirty dishes.
In some machines, you can find sensors, and should these not make contact, it can prevent your machine from running through the main wash cycle as it should.
In our guide, you can learn more about your dishwasher dispenser and how it works in most dishwashers. By the end, you’ll see what causes the issues, from detergent buildup to a broken dispenser bracket and more. (Read Can You Wash Dishes In Cold Water)
You’ll also see how you can deal with the issue to get it working properly or how you can use your dishwasher to get rid of your dirty dishes by adding all the detergent manually as you wait for a fix.
What Do You Do When Your Dishwasher Soap Dispenser Doesn’t Close?
Here are the first things to run through when you have a broken soap dispenser. It may take some troubleshooting as not every model has a light for this on the control panel. The modular dispenser types are simple mechanical devices, yet they perform a vital function during your wash cycle.
1. Soap Buildup
The most common cause of broken soap dispenser issues is an accumulation of soap. This tiny hinged compartment, which is always full of detergent, has an impact on the entire dishwasher cycle. To blast the soap out onto the dishes, most dishwashers direct water directly into this compartment.
Older or poorly constructed dishwashers are unable to achieve the requisite spray angle or force to empty the compartment.
As a result, dried-on dishwasher detergent could clog any portion of the soap dispenser very fast. Furthermore, detergent can build up in the latch grooves, making it impossible or very difficult to latch closed or open.
Soap could build up on the hinges, closing it difficult for the mechanism to open and close smoothly. Remove any remaining residue from the soap dispenser’s cover. with a hot moist cloth.
2. Broken Door Catch
After that, visually inspect the soap dispenser door latch mechanism. If the grooves are clean and clear of detergent residue, you may study how they are supposed to fit together and what the locked position would look like.
You may check this by paying attention to how the latch closes or how it was meant to close. It’s possible that a little piece of food is impeding the latch or that the latch has stopped working properly.
Your latch could be bent out of shape or just worn away, leaving the catch with nothing to latch onto, and thus a dishwasher with broken soap dispenser.
3. Broken Spring
A tiny spring that powers the dishwasher’s soap dispenser causes the detergent door panel of the main compartment to pop open instead of dropping open in the dishwasher.
The spring triggers and pops the soap dispenser open at the correct time in the wash cycles, causing hot water jets to generate soapy water and blast the soap around the dishes.
When the spring breaks, your detergent dispenser will be far less likely to open properly. In addition, you might notice more filth around the dispenser door and the dishwasher door inside it if detergent hasn’t wholly exited the chamber.
A damaged spring can make working on the soap dispenser door more difficult because you’ll have to physically pull it open rather than depending on the spring to trigger the instant the latch is released. (Learn How To Clean The Filter On A Whirlpool Dishwasher)
4. Warped Dispenser Door
Unfortunately, the dispenser door has physically warped during one of the dishwasher cycles, which is one of the other common difficulties with your dishwasher soap dispenser. This is a common problem with major brands, but common in homes that use older appliances.
If the water is too hot, the heat-dry cycle is too hot, or something goes wrong while the washer is running, the soap dispenser could be ruined.
If this is the case, your washing machine may require a new soap dispenser door to replace the broken one.
5. Dispenser Gasket is Worn
In some dishwashers, you can find two compartments compared to one on some machines. However, the rubber ring around the interior of the soap dispenser door is the gasket. It keeps the soap within the dispenser watertight in the sealed compartment until it’s time to use it for the wash cycle.
This gasket is required when preparing a washer for use rather than afterward. This gasket is essential for the washer to precisely control when soap is dispensed from the detergent cup during the washing cycle. It could also be essential to close the dishwasher dispenser door and start the machine.
Gaskets wear out over time, so be prepared to replace your dishwasher soap dispenser door’s gasket. If the gasket is still in good shape but is old and dry, all you have to do is put a small amount of vaseline on it. This will soften it and bring the sea back to life.
Vaseline on the gasket can help you close the dispenser door, allowing you to close the dishwasher door and get your machine back up and running.
6. Faulty Wax Motor
What if the soap dispenser in your dishwasher doesn’t open throughout the cycle? The dishes are beautifully rinsed, but they won’t be as clean with no soap.
If your soap dispenser won’t open and there’s no problem with the door or latch, the problem could be with the wax motor, which tracks timers and trigger the soap dispenser.
This wax motor may need to be replaced, or you may need to hire an expert to fit a new dispenser wax motor.
7. Faulty Rinse Aid Cap
Finally, double-check the rinse aid cap for accuracy. If your dishwasher has a small compartment for rinse aid, it could prevent you from fully closing it. Check the rinse aid cap to determine if it contains the key to completing the repairs. In certain dishwashers, you won’t be able to start a cycle until that small-cap is firmly put back into place. So take it out, inspect it, and carefully screw it back in to see whether it works.
Can I Put Soap Pod In Bottom Of Dishwasher?
Always put dishwasher detergent pods in the detergent dispenser compartment. The pod may dissolve too quickly during the pre-wash if it is left at the bottom of the dishwasher. As a result, there would be no detergent for the main wash cycle, lowering the wash cycle’s efficiency.
In simple terms, if you want to use a dishwasher with broken soap dispenser, you’ll need to either wait for the pre-wash rinse cycle to finish or follow these step-by-step instruction to fix the broken latch before you can effectively use dishwasher with broken bits.
When you fix your dishwasher, you’ll need a few things:
- Screwdriver set (different sizes and heads)
- Torx head screwdriver (number fifteen is the most common)
- Dishwasher soap dispenser spring
- Dishwasher soap dispenser module
Step-by-step instruction to fix dishwasher with broken soap dispenser dishes:
1. Make sure the dishwasher is turned off at the mains
The first thing you’ll want for your safety is to turn off the dishwasher. If you try to fix the appliance with power, you could hurt yourself.
Unplug your dishwasher and inspect it thoroughly. After you’ve pulled the cord and switched off the main power supply, you may check it by turning the machine.
2. Disable the door and control panel
Open the dishwasher door. Remove from the edge of the dishwasher door the Number 15 Torx head screws that are screwed tightly. When you’re done, shut the door and expose the dishwasher internals.
To uncover the door frame’s rear, pull the front panel from the dishwasher door.
3. Remove the dispenser
Remove any protecting material from behind to uncover a spring. If the spring has moved out of position, reconnect it or replace it if broken.
Locating the soap dispenser module and removing it is often the way in older appliances.
Remove all the screws and expose the internals to repair or replace the bi-metal release on the soap dispenser dishes.
4. Install your new dispenser.
Lock the dishwasher door now that the new dispenser bracket has been installed on the door panel. (Read Will Hydrogen Peroxide Bleach Clothes)
Remove the three small screws previously in the bracket, then use these screws to secure the bracket to the plate as you repair the dirty and broken dispenser with a new one.
5. Connect the control panel and door panel.
Attach the power supply to the modular dispenser. Ensure you have fitted all the screws to connect the interior panel tub to the dishwasher door.
To test, fill your soap dispenser and run it through a wash cycle to ensure it works as intended. Once working, it is ready to tackle all the dirt and grease on the stack of dirty dishes you’ve been collecting.